SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Industrial Jib
Industrial Jib - Forklift jibs allow the operator to reach over obstacles with a purpose to put their heavy loads on decks, roofs or even raised platforms. They're usually used to reach through second and third story doorways or even windows so as to carry and transfer loads to areas still under construction. Fork truck jibs are utilized so as to deliver trucks and flatbed trailers, to laminate wood and suspend trusses. Jibs are even typically utilized for reaching over scaffolding for masonry work.
Each jib boom forklift attachment consists of two rotating hooks. One hook can be manually connected to whatever position on the boom's bottom and the second hook is fixed at the end of the jib. This allows the person operating it to carry any load that has two hook points. Depending upon the dimensions of the model, each and every hook is rated at either 4 thousand or 6 thousand pounds It is possible to use either one hook or even both in order to pick up a load. The individual operating it has to make sure that the full weight of the jib and the load will not go beyond the rated capability of the jib as shown on the load chart for that retracted or extended position.
Jib attachments are made to be able to be utilized on rough terrain straight-mast forklifts, industrial lift trucks, and also on extendable-reach forklifts. Forklift jib cranes install onto the forklift by inserting both forks into the fork pockets. The rear of the jib crane then seats against the rear of the fork and a safety chain wraps the forklift carriage to hold it into place.
Load Capacity for the Jib Boom Forklift Attachment
The load capacity of a lift truck jib has a most of roughly 1935 pounds to 6000 pounds on either the extended or retracted positions range. You may want to consult with a material handling specialist regarding the particular restrictions of your forklift application. The load capacity ratings are intended for the jib itself and not the lift truck or the maximum load that could be transferred securely utilizing a particular forklift. It is important to bear in mind that each time whatever attachments like for example a lift truck jib are fitted to the forklift, the new center of gravity created by the attachment would lessen the general lift capability of the forklift. There are directions available that provide details on how to correctly calculate these load limits.
Fork Trucks & Fork lift Attachment Safe Usage
Prior to utilizing whatever lift truck jib, make sure that the shackles and hooks are correctly secured to the forklift. Be sure and even double check that the pins are tight. It is very important that the weight calculations have been properly done and double checked. Bear in mind to consider the fact that rated capacities sometimes lessen every time the boom is in a raised position, when the boom is extended with telehandlers or when the mast is slanted frontward.
A few vital pointers concerning the modifiable jib are: never pull a load using a lift truck jib accessory, for the reason that these attachments are actually designed for vertical lift only. At all times carry the load without letting it swing. Use extreme caution each time a load is lifted to avoid tipping over the truck.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
Prince George, British Columbia
forkliftpartsprincegeorge.ca
Email Us
About Us